Siemens SINUMERIK 840D Diagnostics Guide

1-661
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04 1 Alarms
401902 Parameter ChanNo impermissible in FC19.
Definitions: The parameterized channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402401 Parameter BAGNo impermissible in FC24
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402402 Parameter ChanNo impermissible in FC24.
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402501 Parameter BAGNo impermissible in FC25
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402502 Parameter ChanNo impermissible in FC25.
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402601 Parameter BAGNo impermissible in FC26
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
402602 Parameter ChanNo impermissible in FC26
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB