Siemens SINUMERIK 840D Diagnostic Manual

HMI alarms
11/2006 Overview of Alarms
2-609
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
100115 Please wait, flashing file %1 !!!
Parameters: %1 = --
Definitions: --
Remedy: --
100116 Please wait, selected group is being copied!
Definitions: --
Remedy: --
100117 Please wait, selected group is being deleted!
Definitions: --
Remedy: --
100118 'Skip blocks' ignored for this file!
Definitions: --
Remedy: --
100119 Please wait, copied data is being inserted!
Definitions: --
Remedy: --
100120 Value is too large for%nfield %1
Parameters: %1 = --
Definitions: --
Remedy: --
100121 Value is too small for%nfield %1
Parameters: %1 = --
Definitions: --
Remedy: --
100122 No input rights
Definitions: --
Remedy: --
100123 Invalid character %1
Parameters: %1 = --
Definitions: --
Remedy: --
100124 Above number range%n%1
Parameters: %1 = --
Definitions: --
Remedy: --
100125 Below number range%n%1
Parameters: %1 = --
Definitions: --
Remedy: --

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB