Siemens SINUMERIK 840D Diagnostic Manual

Overview of Alarms 11/2006
HMI alarms
2-612
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
100155 USB device no longer available, editing is%naborted. The last changes
are lost.
Definitions: --
Reaction: Alarm display.
Remedy: --
100156 USB device no longer available,%ncopying was aborted.
Definitions: --
Reaction: Alarm display.
Remedy: --
100157 USB device no longer available.
Definitions: --
Reaction: Alarm display.
Remedy: --
100160 Testing in block, please wait!
Definitions: --
Remedy: --
100161 The number of lines is being calculated, please wait!
Definitions: --
Remedy: --
100162 Caution: Marked line is write-protected!
Definitions: --
Remedy: --
100170 File is binary: editing and paging not possible!
Definitions: --
Remedy: --
100200 Error on reading NCK data: %1
Parameters: %1 = --
Definitions: --
Remedy: --
100201 Error on writing NCK data: %1
Parameters: %1 = --
Definitions: --
Remedy: --
100202 Channel group outside area (%1): %2
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB