Siemens SINUMERIK 840D Diagnostic Manual

Overview of Alarms 11/2006
HMI alarms
2-614
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
100361 Error on saving logic drive data
Definitions: --
Remedy: --
100362 Please wait, saving data
Definitions: --
Remedy: --
100363 Password has been changed, please confirm first
Definitions: --
Remedy: --
100402 Temporarily no access rights %1 !
Parameters: %1 = --
Definitions: --
Remedy: --
100403 No access rights %1 !
Parameters: %1 = --
Definitions: --
Remedy: --
100405 Error var. access: Variable address wrong %1
Parameters: %1 = --
Definitions: --
Remedy: --
100406 Error var. access: Format unknown %1
Parameters: %1 = --
Definitions: --
Remedy: --
100407 Error var. access: Format wrong %1
Parameters: %1 = --
Definitions: --
Remedy: --
100410 Error var. access: Variable does not exist %1
Parameters: %1 = --
Definitions: --
Remedy: --
100411 Error var. access: Value < minimum value %1
Parameters: %1 = --
Definitions: --
Remedy: --

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB