Overview of Alarms 11/2006
HMI alarms
2-652
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
105063 Error on positioning in file %1 !
Parameters: %1 = File name
Definitions: No positioning could be done in the specified file.
System-internal error that does not occur in normal operation.
Remedy: --
105064 Error on reading file %1 !
Parameters: %1 = --
Definitions: The specified file could not be read.
System-internal error that does not occur in normal operation.
Remedy: --
105070 Please wait: initialization of simulation started !
Definitions: The graphic travel path is being initialized.
Remedy: --
105071 Simulation could not be loaded!
Definitions: --
Remedy: --
105072 Error while activating the file!
Definitions: --
Remedy: --
105075 Channel %1 not enough geo axes, contour definition not%npossible!
Parameters: %1 = --
Definitions: The default axis names for the required axes are used.
Remedy: --
105076 Only 2 geo axes defined in channel %1-> working%nplane %2 fixed!
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --
105080 File already selected: %1
Parameters: %1 = --
Definitions: --
Remedy: --
105081 Contents were saved in %1.
Parameters: %1 = --
Definitions: --
Remedy: --
105082 Selection of 2nd file not possible. Device was removed.
Parameters: %1 = --
Definitions: --
Remedy: --
To Next Page
Loading...
