Siemens SINUMERIK 840D - Page 657

HMI alarms
11/2006 Overview of Alarms
2-657
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
107090 MCU: Syntax error (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107091 MCU: Coordinating rules violated (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107092 MCU: Protection level of function inadequate (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107093 MCU: PI service unknown (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107094 MCU: Context is not supported (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107095 MCU: Serious error has occurred (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107096 MCU: PDU magnitude wrong (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107100 MCU: Unknown error has occurred (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
108000 No dynamic memory available
Definitions: --
Remedy: --
108001 No entry in diagnostics file
Definitions: --
Remedy: --