840D/828D SINUMERIK Operate
Notes
9.3 Parameters for "Settings"
operation can be done.
Parameter Unit Meaning
Type of feed:
G94
G95
Axis feedrate/linear feedrate
Revolutional feedrate
Setup feedrate G94 mm/ Feedrate in mm/min
min
Setup feedrate G95 mm/rev Feedrate in mm/rev
Variable increment Enter the desired increment for axis traversal
by variable increments
Spindle speed rpm Spindle speed in rpm
switch back to the main screen of the Sinumerik Operate in the extended
view.
Section 9
Settings
To Next Page
