Navigation bar
Operator control Function
Opens the "Machinery" operating area.
Opens the tool list in the "Parameter" operating area.
Opens the "Work offset" window in the "Parameter" operating area.
Opens the "Program" operating area.
Opens the "Program manager" operating area.
Opens the "Diagnostics" operating area.
Opens the "Commissioning" operating area.
Hides the sidescreen.
Shows the sidescreen.
Multitouch operation with SINUMERIK Operate
3.5 Expansion with side screen
Milling
78 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
