Do you have a question about the Siemens SINUMERIK 810M and is the answer not in the manual?
Control Type | CNC |
---|---|
Control System Type | SINUMERIK |
Number of Axes | Up to 6 |
Programming Language | G-code |
Interface | RS-232 |
Display | CRT |
Operating Temperature | 0°C to 45°C |
Relative Humidity | Up to 95% (non-condensing) |
Explanation of the various components of the operator interface, including CRT, keys, and panels.
Detailed instructions on inputting, modifying, displaying, and managing tool offset data.
Explanation of settable and programmable zero offsets and their input procedures.
Methods for entering part programs using the keyboard or operator prompting (GUIDING).
Procedures for editing part programs by modifying or inserting blocks and words.
How to test programs by simulating tool movements graphically on the CRT.
Procedures for transferring data via RS232C/20mA interfaces and configuring setting data bits.
Classification of alarms into NC and PLC groups and methods for clearing them.