Siemens SINUMERIK 810M - Operating Mode Menu Trees

01.93 2 Operation
2.4 Operating mode menu trees
2.4 Operating mode menu trees
In this section you will find graphical overviews for all the SINUMERIK 810M operating
modes. For each operating mode all the appropriate branches to further functions are
represented for:
•”AUTOMATIC” mode
• ”JOG” mode
•”JOG” mode
(to ”TEACH IN/PLAYBACK” function in AUTOMATIC mode)
• ”MDI-AUTOMATIC” mode
• ”REFPOINT” mode
•”INC FEED 1 ... INC FEED 10000” mode
•”PRESET” mode
•”REPOS” mode
• ”GUIDING” (operator prompting) function.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EQ02 2-47
SINUMERIK 810M, GA3 (BN)