Siemens SINUMERIK 810M - Selecting the Second Language

01.93 3 Operating Sequences
3.1.16 Selecting the second language
3.1.16 Selecting the second language
The standard operator interface texts are available in two languages. The selected language is
marked in the display "Software version display" with an arrow (>). You can select the
"Software version display" via the softkeys DIAGNOSIS and SW VERSION. The language
selection is made in the machine data.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EQ02 3-91
SINUMERIK 810M, GA3 (BN)