Siemens SINUMERIK 810M - SINUMERIK 810 M Operator Interface with External Machine Control Panel

2 Operation 09.91
2.1.2 SINUMERIK 810M operator interface with external machine control panel
2.1.2 SINUMERIK 810M operator interface
with external machine control panel
1 CRT display with
softkeys
(see Section 2.1.1.1)
2
3
Display panel
(see Section 2.1.1.2)
Address / numerical keys
(see Section 2.1.1.3)
4 Editing and input keys
(see Section 2.1.1.4)
5
6
Control keys
(see Section 2.1.1.5)
External machine control panel
(see Section 2.1.2.1)
Operator panel with 22 freely
assignable unlabelled keys, or blank
panel with connector
7
View of the SINUMERIK 810M operator interface with external machine control panel
(( Foto - Nr. 87 E 3844
1:1 mittig einmontieren))
5
6
1
7
2
4
3
2-24 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)