Entry Description
Windows user name
Windows password
Only for USB drives, local
drives and local directo‐
ries
User name and the associated password for
release of the configured drive.
The specifications from the "Global Settings"
window are used as default setting.
Global part program mem‐
ory
Only for local drives, net‐
work drives and global
USB drives
The checkbox defines whether all system no‐
des have access to the configured logical
drive.
Only one drive can be selected as global part
program memory (GDIR). If another drive has
already been defined as GDIR and the check‐
box is activated, the original setting is deleted.
Specifications for the configured softkey
Entry Description
Access level Assign access rights to the connections: From
access level 7 (keyswitch position 0) to access
level 1 (manufacturer).
The particular assigned access level applies
to all operating areas.
Softkey text Two lines are available as labeling text for the
softkey. %n is accepted as a line separator.
If the first line is too long, then a line break is
automatically inserted.
If a space is present, it is taken as a line sep‐
arator.
For language-dependent softkey texts, the
text ID is entered, which is used to search in
the text file.
If nothing is specified in the entry field, then
the symbolic drive name is used as softkey
text.
Softkey icon
No icon No icon is displayed on the softkey.
sk_usb_front.png File names of the icon displayed on the soft‐
key.
sk_local_drive.png
sk_network_drive_ftp.png
Text file slpmdialog File for language-dependent softkey text. If
nothing is specified in the input fields, the text
appears on the softkey as was specified in the
"Softkey text" input field.
Text context SlPmDialog
Managing programs
14.12 Set up drives
Milling
780 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
