HMI alarms
11/2006 Overview of Alarms
2-639
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
104027 NOTICE! Tool Unload running!
Definitions: Note regarding unloading process.
Remedy: Wait until the unloading procedure is terminated.
104028 Error on accessing general tool data
Definitions: --
Remedy: --
104029 You cannot load into this location
Definitions: The location may already be occupied.
Remedy: Select another loading location.
104030 No more data found
Definitions: All existing data was already displayed.
Remedy: --
104031 There is no preselected tool
Definitions: --
Remedy: --
104032 There is no preselected cutting edge
Definitions: --
Remedy: --
104033 Error on Delete cutting edge
Definitions: --
Remedy: --
104034 No work offset selected
Definitions: --
Remedy: --
104035 Position minus coarse offset was transferred
Definitions: --
Remedy: --
104100 PA: Error on opening the menu
Definitions: --
Remedy: --
104101 PA: Error on opening the window
Definitions: --
Remedy: --
104102 PA: Error on reading number of T nos.
Definitions: --
Remedy: --
To Next Page
Loading...
