Siemens SINUMERIK 880 - Page 228

01.93 11 Programming of Cycles
11.9 Mathematical functions
@654 <Var> <Var 1> <Value>
The bit pattern in <Value> is logically negated. The result is stored in <Var>.
Example:
R50 = 00101100
@654 R52 R50 The contents of the pattern variable R50 are negated and
the result stored in R52.
R52 has the contents 11010011.
@655 <Var> <Var 1> <Value>
Bit 0 in <Var 1> and <Value > is logically ORed. The result is stored in <Var>.
@656 <Var> <Var 1> <Value>
Bit 0 in <Var 1> and <Value > is logically EXORed. The result is stored in <Var>.
@657 <Var> <Var 1> <Value>
Bit 0 in <Var 1> and <Value > is logically ANDed. The result is stored in <Var>.
Example:
R50 = 1
R51 = 0
@657 R52 R50 R51 A logical AND operation is performed on the Boolean
variables R50 and R51 and the result is stored in R52.
The contents of R52 are 0.
@658 <Var > <Var 1> <Value>
Bit 0 in <Var 1> and <Value > is logically ANDed. The result is negated and stored in
<Var>.
Example:
R50 = 1
R51 = 0
@658 R52 R50 R51 A logical AND operation is performed on the Boolean
variables R50 and R51; the result is negated and
stored in R52. The contents of R52 are 1.
@659 <Var> <Value>
The logic value (0 or 1) in <Value> is negated. The result is stored in <Var>.
© Siemens AG 1991 All Rights Reserved 6ZB5 410-0HD02 11–41
SINUMERIK 880, (PG)