Need help?Do you have a question about the Siemens SINUMERIK 880 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | SINUMERIK 880 |
| Category | Control Unit |
| Language | English |
Discusses the increasing demands on machine tools due to rationalization and automation, and the role of measuring on the machine.
Categorizes probes based on their deflection directions (multidirectional, bidirectional, monodirectional).
Classifies measuring cycles on turning machines based on workpiece probe types and their respective locations.
Lists R parameters used by measuring cycles for transfer, display, and internal functions.
Details the structure and meaning of the 3-digit D number for tool offset memory when the D number is known.
Introduces tool cycles for tool measurement, including calibration and automatic measurement.
Explains probe calibration in reference holes or surfaces for milling and machining centers.
Determines hole dimensions and center point, performs automatic tool offset, and zero offset.
Details necessary entries for drilling axis, probe number, D number, measuring speed, etc.
Lists alarm numbers, groups, and cancellation methods for measuring cycles.
Provides parameter definitions and tables for L970, L972, L973, L974, L976, L977, L979, L981, L982.
To Next Page
