Siemens SINUMERIK ONE NCU 1750 - Page 139

Default device names
The switch positions 1 to 8 de󹪝ne the default device name of the I/O module.
There are up to 128 default device names. If these default device names are used, there is no
need for initialization.
Note
The default device names cannot be recon󹪝gured, for example with the TIA Portal "Assign device
name" function.
If you are connecting the I/O module to a SINUMERIK control as a PROFINET component, make
sure that this functionality is supported by the associated control.
Table 12-41 Default device name with switch S1
1 2 3 4 5 6 7 8 9 10 Default device name
on on on on on on on o󹪜 pp72x48pn127
o󹪜 on on on on on on o󹪜 pp72x48pn126
on o󹪜 on on on on on o󹪜 pp72x48pn125
o󹪜 o󹪜 on on on on on o󹪜 pp72x48pn124
on on o󹪜 on on on on o󹪜 pp72x48pn123
o󹪜 on o󹪜 on on on on o󹪜 pp72x48pn122
on o󹪜 o󹪜 on on on on o󹪜 pp72x48pn121
o󹪜 o󹪜 o󹪜 on on on on o󹪜 pp72x48pn120
on on on o󹪜 on on on o󹪜 pp72x48pn119
o󹪜 on on o󹪜 on on on o󹪜 pp72x48pn118
on o󹪜 on o󹪜 on on on o󹪜 pp72x48pn117
o󹪜 o󹪜 on o󹪜 on on on o󹪜 pp72x48pn116
on on o󹪜 o󹪜 on on on o󹪜 pp72x48pn115
o󹪜 on o󹪜 o󹪜 on on on o󹪜 pp72x48pn114
on o󹪜 o󹪜 o󹪜 on on on o󹪜 pp72x48pn113
o󹪜 o󹪜 o󹪜 o󹪜 on on on o󹪜 pp72x48pn112
x x x x x x x x "
on on on on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn15
o󹪜 on on on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn14
on o󹪜 on on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn13
o󹪜 o󹪜 on on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn12
on on o󹪜 on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn11
o󹪜 on o󹪜 on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn10
on o󹪜 o󹪜 on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn9
o󹪜 o󹪜 o󹪜 on o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn8
on on on o󹪜 o󹪜 o󹪜 o󹪜 o󹪜 pp72x48pn7
Connectable components
12.3 PP 72/48D PN 2/2A PN
NCU 1750
Equipment Manual, 01/2022, A5E45627807B AE 139