Do you have a question about the Siemens SIRIUS 3UG4501 and is the answer not in the manual?
Surge voltage resistance rated value | 4 kV |
---|---|
Output Type | relay output |
Number of Contacts | 2 |
Number of NO contacts instantaneous contact | 0 |
Number of NC contacts instantaneous contact | 0 |
Protection class IP | IP20 |
Protection class | IP20 |
Product designation | 3UG4501 |
Design of the product | Monitoring relay |
Type | 3UG4 |
Function | Resistance |
Supply Voltage | AC/DC |
Rated control supply voltage | 24 V DC to 240 V AC/DC |
Control supply voltage at AC at 50 Hz rated value | 24 V to 240 V |
Control supply voltage at AC at 60 Hz rated value | 24 V to 240 V |
Control supply voltage at DC rated value | 24 V to 240 V |
Operating range factor control supply voltage rated value at AC at 50 Hz | 0.85 ... 1.1 |
Operating range factor control supply voltage rated value at AC at 60 Hz | 0.85 ... 1.1 |
Operating range factor control supply voltage rated value at DC | 0.85 ... 1.1 |
Electrical endurance (switching cycles) at AC-15 at 230 V typical | 100000 |
Conductor cross section solid | 0.25 ... 2.5 mm² |
Conductor cross section flexible with core end processing | 0.25 ... 1.5 mm² |
Tightening torque with screw-type terminals | 0.5 Nm to 0.6 Nm |
Mounting Type | DIN rail |
Mounting | DIN rail |
Ambient temperature during operation | -25 ... 60 °C |
Operating temperature | -25 ... 60 °C |
Reference code acc. to DIN EN 81346-2 | K |
Reference code acc. to DIN EN 61346-2 | K |
Switching capacity | 250V / 6A |
Provides critical warnings about hazardous voltage, potential death, or serious injury.
Emphasizes that reliable equipment function is ensured only with certified components.
Illustrates the physical assembly and wiring connections for the device, including screw torque specifications.
Details wire cross-sections and AWG sizes suitable for connecting to the device terminals.
Presents diagrams for outflow control functions, including two-point and single-point regulation modes.
Shows diagrams for inflow control operations, illustrating both two-point and single-point regulation types.
Provides the electrical schematic and connection points for the 3UG4501 device.
Details the physical dimensions of the 3UG4501 device models for installation planning.