Technical data
6.2 Output
SITOP PSU300S
Manual, 12.2016, C98130-A7587-A1-7-7629
39
Figure 6-5 Output characteristic 6EP1436-2BA10
Figure 6-6 Output characteristic 6EP1437-2BA20
The device supplies a constant output voltage until the current limit is reached. In the event
of an overload, the output current and the output voltage are reduced.
For 6EP1436-2BA10 and 6EP1437-2BA20, the following applies: When the output voltage
falls below approx. 10 V, the device switches off, and initiates an automatic restart. This
response is repeated as long as the overload condition is present.
To Next Page
Loading...
