To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITOP PSU200M 6EP1333-3BA10 and is the answer not in the manual?
General| Output Voltage | 24 V DC |
|---|---|
| Output Current | 5 A |
| Power Rating | 120 W |
| Efficiency | up to 93% |
| Protection Class | IP20 |
| Operating Temperature | -25 to +70 °C |
| Input Voltage | 120/230 V AC (switchable) |
General safety guidelines for operating electrical devices safely.
Specific safety warnings for operation in hazardous areas as per ATEX directives.
Requirements and precautions for installing the device within enclosures.
Step-by-step instructions for securely mounting the power supply onto a rail.
Step-by-step instructions for safely removing the power supply from its mounting.
Guidelines for vertical mounting on standard rails and required clearances for cooling.
Critical safety warning regarding electrical hazards during installation and maintenance.
Instructions for connecting the AC mains supply to the power supply unit.
Instructions for connecting the DC output to the load and ensuring proper cabling.
Specifications related to the AC input voltage range, frequency, and current.
Specifications for DC output voltage, current, regulation, ripple, and protection.
Details on overvoltage protection, current limitation, and fault indication features.
Specifications on galvanic isolation, protection class, and leakage current.
Electrical test voltages applied for safety certification and compliance verification.
List of certifications and compliance marks (CE, UL, ATEX, etc.).
