Siemens SITOP UPS500S Ex - User Manual

© Siemens AG Österreich, AT-1210 Vienna, Austria. All rights reserved. 1 von 8 SITOP UPS 500S
A5E51289135, 12.2021 SITOP UPS 501S
SITOP UPS500S Ex – Grundgerät / basic unit
6EP1933-2EC51-8AA0
SITOP UPS501S Ex – Erweiterungsmodul / expansion module
6EP1935-5PG01-8AA0
Betriebsanleitung A5E51289135
Operating Instructions
Notice de service
https://support.industry.siemens.com/cs/fr/fr/view/31762923
Istruzioni operative
https://support.industry.siemens.com/cs/it/it/view/31762923
Instrucciones de servicio
https://support.industry.siemens.com/cs/es/es/view/31762923
操作说明
https://support.industry.siemens.com/cs/cn/zh/view/31762923
Руководство по эксплуатации
https://support.industry.siemens.com/cs/ru/ru/view/31762923
https://support.industry.siemens.com

Siemens SITOP UPS500S Ex Specifications

General

Input Voltage	24 V DC
Output Voltage	24 V DC
Explosion Protection	ATEX, IECEx
Protection Class	IP20
Relative Humidity	5% to 95% (non-condensing)
Battery Type	Lead-acid

Summary

Dimension Drawings

Safety and Settings

Cut-in Threshold Setting

Configures the voltage level at which the DC-UPS switches to buffering mode.

Charging Current Setting

Determines how quickly buffer readiness is restored after discharging.

Operating State ON;OFF Setting

Controls the active state of the DC-UPS for normal operation.

Buffering Time Setting

Defines the duration the DC-UPS will provide buffered power.

Output Voltage Interruption

Option to interrupt output voltage for 5s at the end of buffering time.

Status Signaling and USB

USB Interface and Data Management

Details on USB interface, pin assignments, and data reception for status monitoring.

Installation and Connectivity