EasyManuals Logo

Siemens SN Series Operating Instructions

Siemens SN Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Cleaning and maintenance en
29
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not
liable for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water
and a little washing up liquid
are adequate. Do not use sponges with
a rough surface or abrasive detergents,
as these could scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.
m Warning – Health hazard
Never use other domestic detergents,
e.g. containing chlorine!
Special salt and rinse aid
Check the refill indicators @ and
H. If required, refill salt and/or
rinse aid.
Filters
The filters 1Z keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
The filter system consists of a coarse
filter, a flat fine filter and a microfilter.
1. After each washing cycle check the
filters for residue.
2. Unscrew filter cylinder as illustrated
and take out filter system.
3. Remove any residue and clean filters
under running water.
4. Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.

Table of Contents

Other manuals for Siemens SN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SN Series and is the answer not in the manual?

Siemens SN Series Specifications

General IconGeneral
Half Load OptionYes
Place Settings12-14
Annual Water Consumption2800 L
Noise Level44 dB
ProgramsAuto, Intensive, Eco, Quick
Delay StartYes
Child LockYes
Weight45 kg
TypeBuilt-in

Related product manuals