Siemens SN... - Changing the Programme; 2 Cleaning and Maintenance; Intensive Drying; Overall Condition of the Machine

en Cleaning and maintenance
24
Terminating the programme Terminating the programme
(Reset)
1. Press START button h for
approx. 3 sec.
The numerical display )*
indicates ‹:‹‚.
2. The programme sequence lasts
approx. 1 min. On the digital
display )* is indicated ‹:‹‹.
3. Switch off ON/OFF switch (.
Changing the programme
When the START button h has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button h until
the digital display )* •:‹... is
indicated.
4. Release both buttons.
The LED for button # flashes and
the digital display )* displays the
factory setting •:‹….
5. Press programme button # until
the factory set value š:‹‹ is
indicated on the digital display )*.
To change the setting,
1. Press the button 3 to switch the
Intensive drying on š:‹‚ or off š:‹‹.
2. Press START button h.
The set value is saved.
2 Cleaning and
maintenance
Cleaning and m a i ntenance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
ヽ Check spray arm for grease
and limescale deposits.
If you find such deposits:
www.devicemanuals.eu/
the digital display
www.devicemanuals.eu/
the digital display
factory setting
www.devicemanuals.eu/
factory setting
•
www.devicemanuals.eu/
•
:
www.devicemanuals.eu/
:
‹…
www.devicemanuals.eu/
‹…
Press programme button
www.devicemanuals.eu/
Press programme button
the factory set value
www.devicemanuals.eu/
the factory set value
indicated on the digital display
www.devicemanuals.eu/
indicated on the digital display
To change the setting,
www.devicemanuals.eu/
To change the setting,
1.
www.devicemanuals.eu/
1.
Press the button
www.devicemanuals.eu/
Press the button
Intensive drying on
www.devicemanuals.eu/
Intensive drying on
2.
www.devicemanuals.eu/
2.
Press START button
www.devicemanuals.eu/
Press START button