en Cleaning and maintenance
26
Spray arms
Limescale and contaminants in the
rinsing water may block nozzles and
bearings on the spray arms 1B and
1J.
1. Check outlet nozzles on the spray
arms for blockages.
2. Unscrew the upper spray arm 1B.
3. Remove the lower spray arm 1J
upwards.
4. Clean spray arms under running
water.
5. Re-engage or screw on spray arms.
Clean spray arms under running
www.devicemanuals.eu/
Clean spray arms under running
Re-engage or screw on spray arms.
www.devicemanuals.eu/
Re-engage or screw on spray arms.
To Next Page
Loading...
