SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > Setting and unsetting the system > FORCE TO SET
FORCE TO SET
The system can be forced to set while an alarm zone is still open. This operation inhibits the open zone and sets the
system as normal.
To force to set the system:
Scroll to FULLSET or PARTSET A/B.1.
Press SELECT.2.
The keypad buzzer beeps and the first line of the display indicates the open zone
Scroll to FORCED SET.3.
Press SELECT.4.
© Siemens Industry - 11-24-2009
To Next Page
Loading...
