Siemens TC86303 - Descaling; Troubleshooting

13
en
Descaling
-
matic descaling indicator. If calc indica-
tor lights up, the machine needs to be
descaled.
Regular descaling
 makes your appliance last longer
 ensures proper function
 prevents excessive steam
 speeds up the brewing process
 saves energy
Descale the machine with a commercial
descaling agent.
 Make sure that carafe’s lid is closed when
you place the carafe 6󰀨
machine.
 Prepare the descaling solution according
to the manufacturer’s instructions and
pour it into the water tank 1.
Warning:
six cups.
 Switch the machine on using the
O ON/OFF button 7.
 Press and hold down the button descale
11 calc for at least 2 seconds. The des-
caling process starts.
 The program interrupts the process
several times for a few minutes in order
to let the descaling agent penetrate the
deposits. The entire descaling process
takes about 30 minutes. When the
program is running, the display calc will
blink.
 When the descaling process is complete,
the display calc will no longer light up.
Operate the machine twice using clean
󰀨
with more than six cups of water.
 Carefully rinse all removable parts and
the carafe.
Troubleshooting
The machine takes noticeably longer
󰀨
process is complete.
The machine needs descaling.
 Descale the machine as per the instruc-
tions. To start the descaling program,
press and hold button 11 calc for at least
two seconds.
Tip: If your water is very hard, descale
󰀨
calc indicator.
The drip stop 5 leaks.
It needs to be cleaned.
 Clean drip stop 54) under
running water while cleaning it several
