Siemens TE515 - Appliance Operation: Shutting Down and Water Filtration; Switching Off the Appliance; Water Filter Installation and Rinsing

8
en
Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for
optimal performance� The appliance

time (time span can be programmed, see
“Menu settings” Shut off)�
Exception: The appliance switches off
without rinsing if only hot water or steam
were dispensed�
To switch the appliance off manually before
this, press the k off / i button (13)�
The appliance rinses and switches off�
N.B.: If the appliance is being used for the

or the appliance has not been operated

not have the full aroma and should not be
consumed�
When using the espresso machine for the


cups have been dispensed�
After extended use, water droplets may
form on the ventilation slots� This is normal�
Water lter


rinsed� To do this, proceed as follows:
 
water tank with the aid of the measuring
spoon (19)�
 Fill the water tank (17) with water up to
the max mark�
 Press and hold the k off / i button (13)
for at least three seconds� The menu
opens�
 Press the k off / i button (13) repeatedly
until the display shows No / Oldfilter�
 Select Activate filter with the upper
rotary knob (15)�
 Press the start button (10)�
 Place a receptacle with a capacity of
0�5 litres under the outlet (6a)�
 Press the start button (10)�
 
rinse it�
 Empty the container�
The appliance is ready to use once more�
Note: 
activates the setting for the Change filter!
display�