9
en
Change filter! display appears, or at
the latest after 2 months� It needs to be
replaced for reasons of hygiene and so
that there is no build-up of limescale (this
could damage the appliance)� Replacement
customer service (see “Accessories”)� If no
filter setting to
No / Old�
Note:
mark the month in which you inserted the
the latest after two months)�
Note: If the appliance has not been used
for a prolonged period (e�g� vacation) the
is used again� To do so, dispense a cup of
hot water and pour it away�
Menu settings
You can adapt the appliance to your indi-
vidual needs in the menu settings�
Hold the k off / i button (13) down for at
least 3 seconds�
Press the k off / i button (13) repeatedly
until the required menu item appears in
the display�
Select the required setting with the upper
rotary knob (15)�
start button (10)�
To leave the menu without making any
changes, turn the rotary selector to Exit and
press the start button (10)�
You can set the following:
Shut off: Here you can set the time
span after which the appliance automati-
cally switches off following the last drink
preparation� A time between 15 minutes and
4 hours can be set� The default time can be
shortened to save energy�
To save power you can specify a shorter
period�
Filter: Here you can set whether a water
being used, turn the setting to No / Old� If a
Activate filter
Start Calc‘n‘Clean: The service
programmes (Calc‘n‘Clean / descaling /
cleaning) can be selected manually
here� Press the start button (10) and run
the selected programme (see “Service
Programmes”)�
Temp.: The brewing temperature (high /
middle / low) can be set here�
Language: The display language can be set
here�
To Next Page
Loading...
