A5E45779144002-01, 09/2018

Continuous gas analysis

19" rack units of Series 6 and ULTRAMAT 23

Compact Operating Instructions in accordance with EN

61010-1 and EN 60079-0

Compact Operating Instructions

Introduction

1.1

Purpose of this documentation

These instructions are a brief summary of important features, functions and safety information, and contain all necessary

information required for safe use of the respective devices. Read the manual carefully prior to assembly and startup! To

ensure correct handling, become acquainted with the principle of operation of the respective device.

The instructions are aimed at persons who mechanically assemble the devices, connect them electrically, and commission

them.

To achieve optimum usage of the respective device read the detailed version of the respective operating instructions.

1.2

Product versions

These instructions are valid for the 19" rack units of Series 6 and the ULTRAMAT 23 gas analyzers which are available as

19" rack unit as well as bench-top unit. This includes the devices listed below:

● ULTRAMAT 23

● ULTRAMAT 6E

● ULTRAMAT/OXYMAT 6E

● OXYMAT 6E

● OXYMAT 61

● OXYMAT 64

● CALOMAT 6E

● CALOMAT 62E

● FIDAMAT 6

These gas analyzers are suitable for a wide variety of measurements and are also available in different versions. The data

on the label, among others, indicates which device version you have.

Siemens ULTRAMAT 6E - Pin assignments

Other manuals for Siemens ULTRAMAT 6E