Siemens ULTRAMAT 6F User Manual

© Siemens AG 2018. All rights reserved
A5E45779389002-01, 09/2018
1
Continuous gas analysis
Field devices of Series 6
Compact Operating Instructions in accordance with
EN 61010-1 and EN 60079-0
Compact Operating Instructions
1
Introduction
1.1
Purpose of this documentation
These instructions are a brief summary of important features, functions and safety information, and contain all necessary
information required for safe use of the respective devices. Read the manual carefully prior to assembly and startup! To
ensure correct handling, become acquainted with the principle of operation of the respective device.
The instructions are aimed at persons who mechanically assemble the devices, connect them electrically, and commission
them.
To achieve optimum usage of the respective device read the detailed version of the respective operating instructions.
1.2
Product versions
These instructions apply to the field devices of Series 6. These include the devices listed below:
● ULTRAMAT 6F
● OXYMAT 6F
● CALOMAT 6F
● CALOMAT 62F
These gas analyzers are suitable for a wide variety of measuring tasks and are also available in different versions. The data
on the label, among others, indicates which device version you have.
The label of an OXYMAT 6F is shown below as an example.
1
Data matrix code
2
Disposal information: Do not dispose with household waste!
3
CE conformity symbol
4
Name and address of manufacturer
5
Designation of origin
6
Measuring range(s)
7
Serial number
8
Order No. (MLFB number) of the device
9
Device name

Siemens ULTRAMAT 6F Specifications

General

Measurement Principle	Non-Dispersive Infrared (NDIR)
Protection Class	IP54
Output Signal	4-20 mA
Communication	RS-232, RS-485
Power Supply	24 V DC
Measuring Components	CO, CO2, CH4, NO, SO2, NH3, H2O

Summary

Introduction and Product Overview

Purpose of Documentation

Summarizes essential features, functions, and safety info for safe device use.

Product Versions and Application

Lists Series 6 devices and details their ATEX approval for hazardous area operation.

General Information and Personnel

Covers device operation, intended use, and required qualifications for personnel.

Standards and Compliance

Outlines applicable standards and European directives for conformity.

Safety Instructions

Precondition for Use

Emphasizes observing instructions and device symbols for safe operation and maintaining factory condition.

Hazardous Area Safety

Details warnings and precautions for operation in hazardous areas, including explosion protection.

Assembly and Installation

Safety Information

Covers general safety for assembly, installation, and hazardous area considerations.

Installation Location Requirements

Specifies requirements for environment, mounting, and vibrations.

FM and CSA Requirements

Details cable connection and gas requirements for CSA and FM certification.

Connecting and Wiring

Safety and Directives

Covers laws, directives, and safety precautions for electrical connections.

Field Device Connections

Illustrates pipe connections for specific analyzer models.

Electrical Connections

Provides guidance on power supply, signal cables, and terminal connections.

Gas Connections and Preparation

Details gas connections, materials, and sample gas preparation.

Hazardous Area Connectivity

Explains connecting analyzers for hazardous areas, including flame arrestors and electricals.

Commissioning Procedures

Safety During Commissioning

Emphasizes safety measures for commissioning, including hazardous voltages and error handling.

Commissioning in Hazardous Areas

Covers precautions for commissioning in hazardous areas, including explosion risks.

Leak Testing

Describes test setups and procedures for leak testing the containment system.

Hazardous Area Measures

Details Ex px safety equipment, pressure, and key switch functions for hazardous areas.

Service and Maintenance

General Maintenance Safety

Highlights safety precautions for working on the device, including hazardous voltage and media.

Maintenance in Hazardous Areas

Outlines specific requirements for analyzers and Ex px safety equipment maintenance in hazardous areas.

Spare Parts

Lists available spare parts for analyzers used in hazardous areas.

Technical Specifications

General Technical Specifications

Lists general technical data for all analyzers, including enclosure, electrical, and climatic conditions.

Device-Specific Specifications

Provides detailed technical specifications for individual analyzer models.

Hazardous Area Specifications

Details explosion protection data, temperature classes, and groups for hazardous areas.

Gas Inlet and Pneumatic Data

Covers sample gas inlet conditions, protective gas pneumatic data, and differential pressure monitoring.

Disposal and Support

Disposal of Analyzer

Instructs on proper disposal of the analyzer as electronic waste, not with household waste.

Service and Support

Provides information on obtaining technical support and finding regional representatives.

List of Abbreviations

Defines abbreviations and symbols used throughout the manual.