Siemens SITRANS F US User Manual

Order no.: A5E01204521
SFIDK.PS.029.E5.02
SITRANS F US
Ultrasonic flowmeter
Transmitter type FUS060 HART
for use with sensor type SONO 3100,
SONO 3300 and SONOKIT 1- and 2-tracks
[]
s
Operating Instructions
Edition 11/2009 - Revision 05
SW Version 2.01.07
Technical Documentation (handbooks, instructions, manuals etc.) on the complete product
range SITRANS F can be found on the internet/intranet on the following links:
English:
http://www4.ad.siemens.de/WW/view/en/10806951/133300
A5E01204521

Siemens SITRANS F US Specifications

General

Type	Ultrasonic flowmeter
Measurement Principle	Transit time difference
Measurement Range	0.01 to 25 m/s
Temperature Range	-40°C to +200°C
Output Signal	4 to 20 mA, HART, Modbus RTU, PROFIBUS PA/DP
Power Supply	24 V DC or 100 to 230 V AC (depending on model)
Enclosure Protection	IP65, IP67, IP68
Approvals	ATEX, FM, CSA, IECEx (depending on model)
Housing Material	Stainless steel, aluminum
Process Connection	Flanged, Wafer, Threaded
Fluid types	Liquids
Applications	Water, wastewater, chemical, power, oil & gas
Repeatability	±0.15% of flow rate

Summary

Introduction

1.1 Preface

Instructions for commissioning and using the SITRANS F US ultrasonic flowmeter transmitter.

1.2 Introduction

Manual covers FUS060 HART transmitter installation and its use for measuring liquid flow velocity.

1.3 Precision measuring system

The ultrasonic flowmeter is a user-friendly precision measuring system.

1.4 Literature overview

Information on technical literature for FUS060 transmitter and SITRANS F flow meter range.

1.5 System overview

Overview of SITRANS F US ultrasonic flowmeter systems with transmitter FUS060.

1.6 Technical data - transmitter SITRANS FUS060

Detailed technical specifications for the SITRANS FUS060 transmitter.

1.7 Dimensional drawings

Visual representations of the SITRANS FUS060 transmitter with mounting bracket dimensions.

1.8 Measurement

Explains the principle of measurement for SITRANS F US ultrasonic flowmeters.

General Safety Instructions

2.1 Safety notes

Essential safety points for installation, connection, commissioning, and service of the system.

2.2 General notes for the user

Guidance for users on operation, warnings, and important information for avoiding maloperations.

SITRANS FUS060

3.1 Installing SITRANS FUS060

General overview and steps for installing the SITRANS FUS060.

3.2 Installation

Details on physical installation methods, including wall and pipe assembly.

3.3 Connecting the sensor cables to the transmitter

Procedure for connecting sensor cables to the SITRANS FUS060 transmitter.

3.4 Mounting the cables into SITRANS FUS060 connection module

Instructions for properly mounting sensor cables into the connection module.

3.5 Electrical connection of the sensors / transducers

Detailed guide for making electrical connections for sensors and transducers.

3.5.2 Electrical connection - transmitter to transducers (2-tracks)

Guide for electrical connection of transmitter to transducers for 2-track systems.

3.5.3 Electrical connection - allowed cable radius

Information regarding the allowed cable radius for connections.

3.6 Rotating the operating and display panel

How to rotate the device's operating and display panel for better readability.

3.7 Warning

Important warnings and general requirements for electrical installation.

Start Up

4.1 Electrical data connection - Ex-version

Details on electrical data connections specifically for the Ex-version of the transmitter.

4.2 Operation (HART communication)

How to operate the device using HART communication.

Commissioning

5.1 Keypad and display lay-out

Overview of the device's keypad and display layout for operation.

5.2 Operating concept of operating and display panel

Explanation of the hierarchical operating concept and main menu functions.

5.3 Menu structure (SW version 2.01.07)

Detailed diagram of the device's menu structure and navigation.

5.4 Disabling or enabling access to settings

How to secure device settings using a personal code.

5.5 Operating examples

Practical examples demonstrating how to set menu language and change flow units.

5.6 Setting option and factory setting in the display

Table listing menu items, their factory settings, and available options.

Device functions and parameters

6.1 Main menu: Display (menu 1)

Explanation of display settings, backlight, and totalizer reset options.

6.2 Main menu: Diagnostics (menu 2)

Information on device status, error messages, and self-test routines.

6.3 Main menu: Measuring functions (menu 3)

Details on setting measuring variables like flow, sound velocity, and amplitude.

6.4 Main menu: Device output (menu 4)

Configuration options for analog and digital outputs, including error signals.

6.5 Main menu: Identification (menu 5)

How to view and enter device-specific or tag-specific data.

6.6 Main menu: Service (menu 6)

Options for entering codes, resetting the unit, and accessing control values.

6.7 Main menu: Sensor parameters (menu 7)

Details on sensor calibration and application parameters.

6.8 Procedure for entering data into the SITRANS FUS060 transmitter

Step-by-step guide for entering necessary parameters for pipe application.

Trouble shooting

Eliminating process errors

Describes common process errors and their solutions.

Maintenance and Repair

8.1 Technical information on the application

Form for providing technical details about the application for service.

Certificates