Need help?Do you have a question about the Siemens SITRANS F M MAG 6000 CT and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | SITRANS F M MAG 6000 CT |
| Category | Measuring Instruments |
| Language | English |
Details CE-marked equipment, Ex approvals, and temperature specifications for hazardous use.
Describes the standard, blind, CT, and SV versions of the MAG 5000/6000 transmitters.
Details the step-by-step installation procedure for the compact version of the MAG 5000/6000.
Covers installation procedures for the remote version, including wall and pipe mounting.
Explains the installation of the custody transfer-approved CT version, including hardware key and sealing.
Provides detailed wiring diagrams and notes for mains supply, grounding, and output connections.
Details additional electrical connections for PTB K7.2 approved MAG5000/6000.
Describes commissioning for the blind version and changing settings using a standard transmitter.
Explains the local user interface, including display elements and mode field symbols.
Provides steps to change the password for accessing setup mode.
Covers changing parameters like flow direction, Qmax, units, and error level.
Describes current, digital, and relay outputs, including configuration options.
Explains how to use external inputs for batch control, reset, force/freeze, and Qmax 2.
Covers resetting totalizers/counters and restoring factory settings.
Details internal totalizer settings for CT versions, including hot/cold water and other liquids.
Explains the error system, acceptance levels, and how error information is displayed.
Provides a comprehensive list of error codes, their text, cause, and remedy.
Outlines procedures for checking the transmitter, including power-on status and output readings.
Lists detailed technical specifications including mode of operation, input, output, and power supply.
Presents flowmeter uncertainty graphs and reference conditions for sensor calibration.
Details output characteristics for current, frequency, pulse, relay, and limit switch outputs.
Lists factory settings for parameters like password, basic settings, and output.
To Next Page
