To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITRANS F M MAGFLO MAG 5100 W and is the answer not in the manual?
General| Type | Electromagnetic Flow Meter |
|---|---|
| Measuring Principle | Electromagnetic |
| Material | Stainless steel, carbon steel |
| Nominal Diameter | DN 25 to DN 1200 |
| Flow Rate | Varies depending on nominal diameter and velocity; refer to documentation |
| Accuracy | ±0.2% of measured value |
| Pressure Rating | PN 10 to PN 40, ASME Class 150 to 300, others on request |
| Output Signal | 4 to 20 mA, pulse output, frequency output |
| Power Supply | 24 V DC |
| Communication Protocols | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Protection Class | IP67 |
| Lining material | PTFE |
| Electrode material | Stainless steel, Hastelloy, titanium |
Provides detailed dimensions for various nominal sizes and flange standards.
Details the weight for different nominal sizes and flange standards.
Shows how working pressure is affected by temperature for various flange standards.
Ensures the sensor is always completely full with liquid, avoiding air pockets.
Guidelines for installing the flowmeter in vertical pipes, recommending upward flow direction.
Instructions for mounting the sensor in horizontal pipes, avoiding specific positions.
Importance of straight pipe lengths, distances from equipment, and centering for accuracy.
Guidance on installing in large pipes using reducers and pressure drop curves.
Describes how potential equalisation is achieved using built-in earthing electrodes.
Specific instructions for transmitter mounting and screen connections in systems with cathodic protection.
Lists maximum allowable torques for bolts based on nominal size and flange standard.
Detailed dimensions for metric flanges (PN 10, PN 16, PN 40) including bolt patterns and sizes.
Manufacturer's responsibility regarding material choice, stresses, and operational limits.
