Need help?Do you have a question about the Siemens SITRANS F M MAG 6000 and is the answer not in the manual?
General| Type | Electromagnetic Flow Meter |
|---|---|
| Measurement Principle | Electromagnetic |
| Measurement Range | 0 to 12 m/s |
| Output Signal | 4 to 20 mA, pulse |
| Communication Protocols | HART, Profibus, Modbus |
| Power Supply | 24 V DC |
| Protection Class | IP67 |
| Lining Material | PTFE |
| Electrode Material | Stainless steel, Hastelloy, titanium, tantalum, platinum |
| Material | Stainless steel |
| Certifications | ATEX, FM, CSA |
| Accuracy | ±0.2% of rate (optional ±0.1% of rate) |
| Process Temperature | -40°C to +180°C |
| Process Pressure | Up to 40 bar (580 psi) depending on flange and liner material |
Details specific requirements for hazardous environments.
Provides notes on mains supply, grounding, and output cables.
Explains the operation of the local user interface and its display.
Explains the error system, acceptance levels, and status logs.
Procedures for checking transmitter functionality.
Detailed specifications of the device.
Lists the default factory settings for parameters.
To Next Page
