Siemens SITRANS F M MAG 6000 - A.7 Error number; A.8 Direction;limit; A.9 Batch

Menu diagrams
A.7 Error number
79
A.7 Error number
A.8 Direction/limit
A.9 Batch
1)
Visible only on Digital output.
Note
If batch function is chosen on the relay output, the digital output will be turned off if it has
been set up for pulse, frequency or batch.
If digital output is set up for pulse, frequency or batch, then the relay output will be turned off
if it has been set up for batch.
www.eltra-trade.com
info@eltra-trade.com +421 552 601 099