Need help?Do you have a question about the Siemens VersiCharge AC and is the answer not in the manual?
General| Charging Standard | SAE J1772 |
|---|---|
| Input Voltage | 208-240 VAC |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
| Enclosure Rating | NEMA 4 |
| Mounting Type | Wall-mounted |
| Connectivity | Wi-Fi |
| Type | Electric Vehicle (EV) Charger |
| Output Current | 16A or 30A |
| Maximum Output Power | 3.8 kW or 7.2 kW |
Important initial safety reading instructions.
Explanation of safety symbols used in the manual.
Covers essential safety guidelines for installation and operation.
Detailed safety precautions to prevent fire and electrical hazards.
Lists applicable electrical codes and industry standards.
Identifies and describes safety labels on the product.
Defines key terms used throughout the manual.
Details all necessary components for installation.
Step-by-step guide for mounting the charger on wall studs.
Instructions for alternate mounting on wallboard.
Procedure for physically installing the VersiCharge unit.
Steps for securing the charger and attaching the cable holder.
Verification steps after installation to ensure proper function.
Guidance for electricians on installing charging outlets.
Procedure for hardwiring plug-supplied 40A units.
How to adjust the charger's amperage setting.
Explanation of amperage adjustment dial settings.
Specifies electrical circuit requirements for the charger.
Details on connecting commercial units with a remote control interface.
Instructions for installing SIM cards in commercial units.
Steps for establishing an Ethernet connection for commercial units.
Diagram illustrating general Ethernet network setup.
Configuration guide for ModBus communication.
Specifics for establishing ModBus RTU connections.
Configuration of termination switches for ModBus.
Best practices for ModBus RS-485 wiring.
Example setup steps for ModBus RTU communication.
Instructions for registering residential chargers via the mobile app.
Steps to create a user account for the VersiCharge app.
Describes the meaning of different LED light indicators.
General instructions for operating the VersiCharge unit.
Step-by-step guide for basic charger operation.
Procedure for initiating charging using the RFID feature.
Routine cleaning and upkeep for the charger's exterior.
Regular inspections of the charger for damage or debris.
Details of the manufacturer's limited warranty policy.
To Next Page
