Do you have a question about the Siemens eCharger and is the answer not in the manual?
Charging Power | Up to 22 kW |
---|---|
Output Voltage | 230 V AC |
Output Current | Up to 32 A |
Charging Standard | IEC 61851 |
Connector Type | Type 2 |
Communication | OCPP 1.6 |
Protection | Overcurrent, Overvoltage |
Mounting Type | Wall-mounted |
Describes the slots for placing hearing instruments for charging.
Details the cavity for accessories like receiver units, LifeTube, domes, and earmolds.
Explains the function of status and power indicator LEDs on the charger.
Identifies the connection point for the power supply unit and adapters.
Specifies the eCharger's purpose for Siemens hearing instruments.
Details the meaning of warning and information symbols used in the guide.
Explains the meaning of LED indicators for charger status.
Steps to prepare the charger and connect it to a power supply.