www.usa.siemens.com/versicharge
Siemens VersiCharge
™
Quick Start Guide
Electric Vehicle Charging Station
Sample Tools Used
Certified Electrician
(Recommended)
2 pole, 40 amp
circuit breaker
Cordless Drill
(Phillips Bit)
#8 copper wire,
3 conductors
240 V AC
Voltmeter
NEMA 6-50 Outlet
(if not hardwiring)
Powering
your drive
into the
future!
The information provided in this brochure contains merely
general descriptions or characteristics of performance which
in case of actual use do not always apply as described or
which may change as a result of further development of the
products. An obligation to provide the respective
characteristics shall only exist if expressly agreed in the
terms of contract.
Siemens Industry, Inc.
5400 Triangle Parkway
Norcross, GA 30092
1-800-241-4453
info.us@siemens.com
Order No. RPBR-VERQS-0814 | Printed in USA |
All rights reserved.
© 2014, Siemens Industry, Inc.
www.usa.siemens.com/versicharge
All product designations may be trademarks or product
names of Siemens AG or supplier companies whose use by
third parties for their own purposes could violate the rights
of the owners.
NEC® is a registered trademark of the National Fire
Protection Association.
Refer to your USB key chain before installation to:
• Review the complete Installation and Operations Manual
• Learn how to use the amperage adjustment dial or
participate in utility programs using the VersiCharge remote
control interface
• Find additional information on how to future proof your
home’s energy consumption
To Next Page
Need help?
General
