By pressing the pushbutton multiple times,
the
start of the programme can be delayed from
1 to 19 hours.
The selection is confirmed after a few
seconds. To activate the delayed starting,
press the ”Start“ button.
The course of the Delayed Start is displayed
every hour from 19 hours to 1 hour, and
then every minute from 59 minutes to
1 minute. During the entire process, the
Delayed Start symbol is illuminated.
The four segments flash in succession.
After the Delayed Start time ends, the
programme starts and the remaining time
is indicated on the display panel.
During the course of the Delayed Start, the
settings may be changed at any time, see
section ”Changing the programme“.
A
A
3
Delayed Start
18
Topping up laundry + changing programs
Changing the programme
If you have chosen the wrong programme:
• Turn programme selector to ”Off“.
• Set programme selector to the desired
programme.
• Press
”Start“ if applicable.
The spin speed may be changed at
any time during the programme.
As long as they have not finished, all
options may be activated or
deactivated at any time during the
course of the programme.
Terminating the programme
If you would like to terminate a programme
before it is completed:
• Turn programme selector to ”Off“.
• Set programme selector to ”Spin“.
Select desired spin speed for ”Spin“ (but not
Rinse Stop).
• Press
”Start“ button.
During the washing cycle, laundry may be added or removed.
• Press the ”Start“ button to abort the programme.
• Remove or add laundry if necessary.
(*) It may be 1 to 2 minutes until the lid unlocks.
• Press the ”Start“ button to restart the programme.
If a Delayed Start has been selected, the drum may be opened
at any time before the start of the programme without aborting
the programme and having to start anew.
5
5
In the indicated
remaining time is stopped.
In the remaining time
function is again activated
(two dots flash).
A
A
Adding or removing laundry
(not possible during spin cycle):
To Next Page
Loading...
