19
Before switching on the machine,check that the mains lead is connected and the tap is
open.
Ensure that all lids are properly closed.
For purposes of safety, it is suggested that the mains cable be unplugged and the tap
closed when the programme has ended.
After a power outage, the programme resumes from the point at which it was broken
off.
Changing the programme
(continued)
Changing the programme:
All modifications are possible before the ,
”Start“ button has been pressed.
- immediately after the start of the
programme:
Change programme (e.g. from ”COTTONS“ to
”DELICATES“ etc.). Then press ”Start“ button
again.
- during the washing programme:
Change programme (e.g. from ”DELICATES“
to ”COTTONS“ etc.). Then press ”Start“
button again. Some of the water may be
drained. The entire programme begins anew.
The temperature can be changed during the
programme without pressing the ”Start“ button
again.
The spin speed may be changed at any time.
All additional functions may be activated or
deactivated during the entire programme as
long as they have not finished.
- during the preselection of starting time:
During the preselection of the starting time,
all programme changes are allowed.
The preselection of starting time may be
changed at any time, e.g. from to 18
hours.
If the programme should start immediately,
set the starting time back (a step after 19 h)
and press the ”Start“ button.
All available additional functions may be
activated during the preselection of starting
time.
- at the end of the programme:
If appears in the display, a new
programme may be selected without first
having to set the programme selector on
”Off“.
1
A
3
5
5
5
To Next Page
Loading...
