23
Troubleshooting minor faults
Malfunctions of the washing machine are indicated on the display panel.
Flashing
indicator
Cause / Remedial action
Drain hose condition: The connection must not be blocked (see chapter
”APPLIANCE CONNECTIONS: Water drainage“).
Drum blocked. Check if a small laundry item (e.g. handkerchief, sock...)
has got between the detergent dispenser and drum. For access to the
bottom of the dispenser, refer to the chapter ”CLEANING THE FILTER“
Lid improperly closed. Check if the lid is closed. Start the programme
using the ”Start“ button.
No water flows in. Open tap and press the ”Start“ button again. This
malfunction may be caused by an improper water supply hose connection
(see chapter ”APPLIANCE CONNECTIONS: Water-inlet hose“).
Pump filter blocked. Clean the pump filter (see chapter ”CLEANING THE
FILTER“) and restart the program with the ”Start“ button.
Check drain hose: The connection must not be blocked (see chapter
”APPLIANCE CONNECTIONS: Water drainage“).
To Next Page
Loading...
