Siemens Washing machine - Removing Transportation Protection Devices; Step-by-Step Device Removal

6
Removing the transportation protection
devices
Figure 1 Figure 2.1
Figure 2.3
13
1
1
2
2
A
1 Remove the machine from the transport
base. Remove
wedge

( Figure 1 ).
2 Remove the 4 screws

with a screwdriver
(Figure 2.1 ).
3 Remove transportation protection devices
C: Both bolts

are for this purpose
(Figure 2.2 ) remove with a 10 mm or 13
mm spanner (depending upon model).
Check to see that both plastic inserts on
the connecting carrier have also been
removed.
Refasten the screws

at their original
locations.
4

Both holes must be covered with the
caps provided

(found in the accessories
package)
( Figure 2.3 )!

Before the machine is used for the first time, all transportation protection devices
from the back of the appliance must be removed and stored for any later transport
(i.e., relocation)!
Figure 2.2