Siemens WG44B209GB - Page 25

Buttons en
25
Button Selection More information
⁠
(Spin Speed)
- 1400 Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
(mains switch) ¡ Switch on
¡ Standby mode
Switch on the appliance or put it in
standby mode.
Remote Start ¡ Activate
¡ Deactivate
¡ Open the
HomeConnect
menu
→"Remote start", Page37
⁠3sec. (Child
Lock 3 sec.)
¡ Activate
¡ Deactivate
→"Childproof lock", Page35
Basic Settings Multiple selection
→"Basic settings", Page39
+Options ¡ Displaying or
hiding addi-
tional buttons
¡ Adjusting the
display of addi-
tional buttons
¡ If you briefly press the button, you
can display or hide additional but-
tons.
→"Displaying or hiding additional
buttons", Page19
¡ If you press and hold the button for
approx. 3seconds, you can adjust
the display for the additional but-
tons.
→"Adjusting the display of addi-
tional buttons", Page19
mini load ¡ Activate
¡ Deactivate
Wash small loads of delicate or hard-
wearing fabrics.
The programme running time is
shortened, and the water and energy
consumption adjusted to the load.
Note:If you activate the setting, the
programme's maximum load capacity
is reduced to 0.5 kg.
Prewash ¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.