Siemens WG44B209GB - Home Connect; Setting up the Home Connect App; Setting up Home Connect; Home Connect Menu

en HomeConnect
36
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by HomeConnect.
¡ Please also follow the instructions
in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
15.1 Setting up the
HomeConnect app
1. Install the HomeConnect app on
your mobile device.
1
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
15.2 Setting up HomeCon-
nect
Requirements
¡ The HomeConnectapp has been
installed on your mobile device.
¡ Wi-Fi has been activated on the
router.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1. Press and hold Remote Start for
approx. 3seconds.
2. Follow the instructions in the
HomeConnect app.
15.3 HomeConnect menu
The HomeConnect menu contains
all of the HomeConnect settings.
Calling up the HomeConnect
menu
▶ Press and hold Remote Start for
at least 3seconds.
a The display shows the first setting
of the HomeConnect menu.
Navigating in the HomeConnect
menu
▶ Briefly press Remote Start until
the display shows the required set-
ting.
Exiting the HomeConnect menu
▶ Press and hold Remote Start for
at least 3seconds.
1
Apple App Store und the Apple App Store logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.