IMPORTANT
The information contained herein is general in nature and not intended for specific
application purposes. It does not relieve the user of responsibility to use sound
practices in application, installation, operation, and maintenance of the equipment
purchased. Siemens reserves the right to make changes in the specifications
shown herein or to make improvements at any time without notice or
obligations. Should a conflict arise between the general information contained in
this publication and the contents of drawings or supplementary material or both,
the latter shall take precedence.
QUALIFIED PERSON
For the purpose of this manual and product labels, a qualified person is one who
is familiar with the installation, construction, operation or maintenance of the
equipment and the hazards involved. In addition, this person has the following
qualifications:
(a)
is trained and authorized
to de-energize, clear, ground, and tag circuits
and equipment in accordance with established safety practices.
(b)
is trained
in the correct care and use of protective equipment such as rubber
gloves, hard hat, safety glasses or face shields, flash clothing, etc., in accordance
with established safety practices.
(c)
is trained
in rendering first aid.
NOTE
These instructions do not purport to cover all details or variations in equipment, nor
to provide for every possible contingency to be met in connection with installation,
operation, or maintenance. Should further information be desired or should particular
problems arise which are not covered sufficiently for the purchaser’s purposes, the mat-
ter should be referred to the local Siemens sales office.
The contents of this instruction manual should not become part of or modify any
prior or existing agreement, commitment, or relationship. The sales contract contains
the entire obligation of Siemens Energy & Automation, Inc. The warranty contained in
the contract between the parties is the sole warranty of Siemens Energy & Automation,
Inc. Any statements contained herein do not create new warranties or modify the
existing warranty.
Hazardous voltage.
Will cause death or
serious injury.
Keep out.
Qualified personnel only.
Disconnect and lock off all power before
working on this equipment.
DANGER
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
Need help?
General
