Technical data en
33
J Technical data
Technical data
Dimensions:
84.5 x 59.8 x 62 cm
(height x width x depth)
Weight:
78 kg
Mains connection:
Nominal voltage 220–240 V, 50 Hz
Nominal current 10 A
Nominal power 2300 W
Water pressure:
100–1000 kPa (1–10 bar)
Power consumption when switched
off:
0,12 W
Power consumption when ready for
use (left-on mode):
0,43 W
5 Positioning and
connecting
Positioning and connecting
Standard accessories
Note: Check the appliance for transport
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water outlet hose to a siphon.
( Mains lead
0 Bag:
■ Installation and operating
instructions
■ Customer Service location
directory*
■ Warranty*
■ Supplement*
■ Cover caps for openings after
the transport braces have
been removed
8 Water inlet hose on aquaStop
models
@ Water outlet hose
H Elbow for securing the water
outlet hose*
P Cold water inlet hose on
Standard/Aqua-Secure models
* Depending on the model
3
+
#
To Next Page
Loading...
