Siemens WM14UPH0IN - Changing the Basic Set- Tings; Cleaning and Servicing; Cleaning the Drum; Cleaning the Detergent Drawer

en Cleaning and servicing
40
17.2 Changing the basic set-
tings
1. To call up the basic settings, press
.
a The display shows the selected ba-
sic setting and the current value.
2. Select the required basic setting.
→"Overview of the basic settings",
Page39
3. To change the value, press / .
4. To save the changes, switch off
the appliance.
18 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Run the programme ⁠Drum De-
scale without laundry and using
washing powder that contains
bleach.
18.2 Cleaning the detergent
drawer
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product or if the
detergent drawer is dirty, clean the
detergent dispenser.
ATTENTION!
The pump unit contains electrical
components. Electrical components
may be damaged if they come into
contact with liquids.
▶ Do not clean the pump unit in the
dishwasher and do not immerse it
in water.
▶ Protect the electrical connection
on the rear against water, deter-
gent and fabric softener residue.
1. Switch off the appliance.
→"Switching off the appliance",
Page33
2. Pull out the detergent drawer.
3. Press down on the insert and re-
move the detergent drawer.