18
Ø Changing the programme
If you have mistakenly selected a wrong programme.
1. Select ! Start/Reload.
2. Select another programme.
3. Select ! Start/Reload. The new programme starts from
the beginning.
Ø Terminating the programme
For programmes at high temperature:
1. Select ! Start/Reload.
2. To cool down laundry: Select q Rinse.
3. Select ! Start/Reload.
For programmes at low temperature:
1. Select ! Start/Reload.
2. Select 0 p Spin/Empty (if only a drained cycle is
required: set rpm (spin speed) to - - -).
3. Select ! Start/Reload.
Ø End of programme by Rinse stop
1. Select 0 p Spin/Empty (if only a drained cycle is
required: set rpm (spin speed) to - - -).
2. Select ! Start/Reload.
To Next Page
Loading...
