Siemens ws12g160by - Signal

23
Signal
Setting the signal
1. Activate the setting mode for the signal volume
turn to Off hold down + and turn one posi-
tion to the right
Press and hold the button for ap-
prox. five seconds until the display
elements light up. Setting mode is
activated.


2. a) Set volume for button signals (depending on model)
press the button until the re-
quired volume is reached
set to Off, swhich exits setting mode for
the signal volume
2. b) Selecting volume of the information signals
rotate it
one step
to the
right
press the button until the re-
quired volume is reached
set to Off, swhich exits setting mode for
the signal volume

