Siemens ws12g160by - Transportation, E.g. if Moving House

47
Transportation, e.g. if moving house
Preparatory work
1. Turn off the tap.
2. Reduce the water pressure in the supply hose. Maintenance
– filter in the water supply ~ Page 30
3. Drain the remaining detergent solution. Maintenance –
detergent solution pump blocked ~ Page 28
4. Disconnect the washing machine from the mains.
5. Remove the hoses.
Installing transportation protection devices
1. Remove the covers and keep in a safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
Clamp the mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
– The transport locks must be removed!
– To prevent unused detergent from flowing into the outlet
during the next wash: Pour 1 litre of water into dispenser II
and start the 0 p Spin/Empty programme: (if only a drained
cycle is required: set rpm (spin speed) to - - -).